Multi Slider – User Manual
Copyright © 2017 Waterbird Systems GmbH
www.waterbird.at
- 9 -
2.
Mobile App
The mobile app
Multi Slider
is used as wireless remote control for the Multi
Slider Control Unit.
2.1
Operating Systems
The Mobile App for controlling the motorized Multi Slider is available for Android and iOS
Operating Systems.
Android
Min. Android Version: 5.0
https://play.google.com/store/apps/details?id=at.waterbird.multislider
iOS
Min. iOS Version: 10.3
https://itunes.apple.com/app/multi-slider/id1273882924
2.2
Connecting to Control Unit
The wireless connection to the Control Unit is established via
Bluetooth Low Energy (4.0).
Make sure the Control Unit is powered with 12V on the supply
connector before you start the Multi Slider App. At initial App
start you could be prompted to give necessary permission (e.g. to
enable Bluetooth).
During startup, the App scans for the Control Unit. If successful,
the Multi Slider is presented on the screen. Connection is
performed by touching the Multi Slider entry.
If the Multi Slider Control Unit was not found immediately, assure
the Control Unit is powered and its Blue LED flashes. Then restart
the scan by pulling down the “Update Device List” bar.
Additionally you can try to restart the mobile phone and/or reset
the Control Unit.
