10
11
www.watercarehome.co.uk
www.watercarehome.co.uk
REGISTER YOUR SOFTENER
To register your new WaterCare Home softener please visit:
www.watercare.co.uk/water-softener-reg
or scan the QR code:
The indicator will be flashing, do not adjust.
Press 4 times to save value and move on
to next step.
Display should now be showing the current time of
day and volume of soft water remaining.
SET THE INCOMING HARDNESS
(DEFAULT 300PPM)
The indicator will be flashing.
Press or to adjust value.
Press to save value and move on to next digit.
Repeat until correct value is displayed.
Press to save value and move on to next step.
For an estimate of water hardness in your
area scan the QR code or visit:
www.watercare.co.uk/water-hardness-calculator
(Please note this is an estimate. For an accurate water hardness
reading we recommend undertaking a water hardness test)