Section 9 – Custom Settings Menu
33
Section 9. – Custom Settings Menu
The Custom Settings Menu provides access to settings which may need adjustment to suit non-
standard installations. Care must be taken when altering these settings as poor or incorrect pool
control may occur.
An alternative pH Calibration method using a 7.00 pH Buffer is also available in the Custom
Settings Menu.
9.1 Accessing the Custom Settings Menu
1. Plug the
Chemflo
mains lead into the mains power outlet.
2. Switch the power ON while pressing the
key.
3. The Custom Settings Menu will now be displayed.
4. The
Chemflo
will remain in the Custom Settings Menu until the
is pressed.
9.2 Select Pool Size
1. Access the Custom Settings Menu. See section 9.1
2. Press until “
o
Pool Size
” is selected and press
.
3. Press or
until the desired pool size is selected and press
. If in doubt, select a size
that is larger than the pool.
The Pool Size set-up adjusts the Emergency ShutOFF Timer and Control Setup to the ideal values
for that pool size. For more details on these topics, see sections 9.3 and 9.6.
9.3 Pool Pump Timer Cycle
9.3.1 To select a pre-set Timer program
Those users who do not wish to use the default Summer/Winter Timer program can select the
Summer
or
Winter program to operate all year round…
1. Access the Custom Settings Menu. See section 9.1
2. Press until “
o
Set Timer
” is selected and press
.
Set Timer
>Auto <
p
3. Press until the desired choice is selected and press
.
‘
Auto
’ is the default program, and operates the pool pump as per the details in section 3.4.1.
The ‘
Summer
’ program operates the pool pump from 06:00 to 10:00 and from 15:00 to 19:00 every
day. This cycle operates all year round if selected.
The ‘
Winter
’ program operates the pool pump from 06:00 to 10:00 every day. This cycle operates
all year round if selected.
The ‘
Custom
’ program is covered in section 9.3.3.
To operate the pump 24 hours per day, select ‘
Continuous
’. This is covered in the next section.
