OXISWIM Quick Reference Guide
Page | 10
WATER CHEMISTRY
–
Chlorine use
When operating using chlorine as a sanitiser, the following operating parameters are
recommended:
Test
Result
Residual sanitiser chlorine
1.0ppm
–
3.0ppm
pH level
7.2-7.6
Total Alkalinity level
100ppm
–
150ppm
Calcium Hardness
180ppm
–
400ppm
Salinity (= total Pool salt & Mineral Crystals) For low salt cell
use*
2000ppm-3000ppm
Phosphate level (ppm)
Less than < 0.5ppm
PLEASE NOTE:
The above information is a guide only. Please refer to the local laws that
govern a swimming pool or spa operation in your area. Always operate the system in
compliance with local laws.
