OXISWIM Quick Reference Guide
Page | 15
2.
Set Timer
Starting from the main screen press the Up and Down button simultaneously to enter the
menus. Scroll and select the
Time Switch
option.
In the next menu select “
Timer Progr.0
”. For our uses
, we will only be selecting Timer 0 as
the main timer on both the ACID and PEROXIDE pumps.
ACID Pump
For the Acid Pump, the default setting is for a 50,000 litre pool. To increase or decrease the
acid dose rate, change the % feed in the top right hand corner. Refer to the dose charts
located in the quick reference guide for assistance with determining the correct setting for
your particular size pool. To scroll through the setting in each menu use the tick button(
)
to scroll right and the ESC button (
) to scroll left. Use the up and down button to change
the setting values. When completing any changes in the menu always click the tick button
(
) get to the end of the changes to save the settings.
