I pg 18
Pool Heat Pump
How to program the Multi Function electronic
control timer to control your pool pump filtration
Note: This option is available only on the Smart Energy pool heat pump model.
The Multi Function electronic control includes an adjustable internal timer, which allows to
control the filtration time of the pool pump. This timer allows
6 cycles of filtration
during
a day.
Example:
Desired time of filtration: 3 hours / day = 180 minutes / day
Calculation:
180 minutes/day
DIVIDED
by 6 cycles of filtration/day = 30
Finally, your pool pump will work 6 times a day during 30 minutes; however, if the water
temperature programmed has not reached, the pool pump will work until it reaches the
programmed water temperature.
How to program the timer
1. Press the SET key until FIL is displayed;
2. If you want the pool pump to work continuously; press the up or down arrow until ON
is displayed;
3. If you want the pool pump to work during a specific period, press the up or down
arrow until the number of hours per day of the filtration that you desire is displayed (for
example: you would like 3 hours/day, the number 3 must appear on the Multi Function
electronic control).
Note: This type of programming FAVOURS the maintaining of the programmed water
temperature rather than the time of filtration.
How to stop the timer
1. Press the
SET
key until the Multi Function electronic control displays
FIL;
If you do not want to use the timer included in the Multi Function control, press the up or
down arrow until
OFF
is displayed.
