7
6. Allgemeine Hinweise
Beim HEATKILLER® MB-X gibt es keinen
definierten
Ein-
und
Ausgang.
Das
Kühlmedium kann von beiden Seiten ein- oder
ausströmen.
Beim
Verschlauchen
der
Kühlkörper ist darauf zu achten, dass keine
großen Zug- und Druckkräfte durch die
Schläuche auf den Kühler übertragen werden.
Es wird empfohlen demineralisiertes bzw.
entionisiertes Wasser (destilliertes Wasser) als
Kühlmedium zu verwenden. Zum Schutz vor
Algen kann handelsübliche Zitronensäure
verwendet werden, ein Ausbreiten von Algen
wird so wirkungsvoll verhindert
.
6. General Information
The HEATKILLER® MB-X does not have a
defined input and output. The cooling medium
can stream in or out on both sides. Tubing
should be routed in a way that does not
transmit excessive strain onto the cooler.
We recommend using demineralised or
deionised water (distilled water) as cooling
medium. To prevent the build-up of algae, use
common citric acid, which reliably prevents the
spread of algae?