background image

Setting

Select a function by pressing the function button and

set the required time with the +/- buttons.

+/- Buttons

Pressing the “+” button increases the time set,

pressing “-”  decreases it.  The count-up or count-

down speed increases the longer the button is held

in the appropriate position.

Setting Time of Day

Keep duration and end time buttons pressed while

setting time of day with +/- buttons.  Any programme

which has been set is cancelled and the outputs

switched on.

Manual Operation

Press duration and endtime button together.  The

relay contacts will switch on.  

The “A” symbol will be erased, the pot symbol illumi-

nated. 

Any programme which has been set is cancelled.

Semi-automatic Operation with Cooking

Duration

Select cooking duration function and set required

duration with the +/- button.

8

Minute Minder

Cooking Duration

Function Buttons

Cooking end time

 

OPERATION OF MINIATURISED ELECTRONIC PROGRAMMER

"A" and cookpot symbols appear. 

The relay output becomes active.

If time of day = cooking end time the relay out-

put and the cookpot symbol are switched off.

The audible signal sounds. The symbol "A"

blinks.

Semi-automatic Operation with Cooking

End Time

Select cooking end time function and set

required end time with the +/- button. 

The "A" and cookpot symbols appear. 

The relay output becomes active.

If time of day = cooking end time the relay out-

put and the cookpot symbol are switched off.

The audible signal sounds and "A" blinks.

Fully Automatic Operation

Select cooking duration function and set

required duration with the +/- button.

The "A" symbol appears. The relay is switched

on and the cookpot symbol appears.

Select cooking end time function and the earli-

est possible end time is displayed.

Set the required end time with the +/- button.

The relay and the cookpot symbol are

switched off.

The cookpot symbol appears again when time

of day = the calculated start time.

After the automatic programme has ended, the

symbol "A" blinks.

The audible signal is heard and the cookpot

symbol and the relay are switched off.

Minute Minder

Select minute minder button and set required

time with +/- button. 

As the time set elapses the symbol bell symbol

is displayed. 

After the time set has elapsed, the audible sig-

nal sounds.

Audible Signal 

The audible signal (1 Hz interval) sounds at

the end of a minute minder cycle or of a cook-

ing programme for a period of 7 minute. The

signal can be cancelled by pressing any func-

tion button.

Summary of Contents for 60cm Dual Fuel
















Reviews: