background image

41

Model Number/Serial Number Reference

WaterFurnace manufactures a variety of models of geothermal units. The various models have unique model num-
bers which can be located on the unit’s Data Plate. The data plate is usually placed on the front or side of the unit. 

The model number contains 11 to 15 letters and numbers.

The unit’s serial number can also be found on the data plate. Serial 
numbers consist of two letters followed by four numbers, all of which 
indicate by code, the date your unit was built. 

Locate the data plate on your unit and record the model number and 
serial number on the inside front cover of this Owner’s Manual for future 
reference. 

You can identify the type of unit you have by the unit emblem or the 
model number and a few other identifying characteristics. There are 
fi ve “families” of units in our product line, and within each family are  
one or more models. The fi ve families of units are:

 

 Envision

 

 E Series 

 

 Premier 

 

 Synergy3

 

 Versatec

If your unit has a model number starting with “E”, you have an “E” 
Series unit. E Series units are available in “E”, “ES”, “EZ” and “EW” 
models. Standard E units are self-contained “package” units in either 
vertical or horizontal cabinets. ES and EZ units are “splits”, and are 
connected to a separate indoor air handler or gas furnace. EW units are 
for hydronic (water-based) applications. 

If your unit has a model number starting with “P”, you have a Premier 
Series unit. Premier units are available as “package” units in both 
vertical and horizontal cabinets. If the fi rst letter in the model number is 
“P” and the fourth digit is “D”, you have a Premier “Split” unit. Splits are connected to a separate indoor air handler 
or gas furnace.

If your unit has a model number starting with “R”, you have a Synergy3 unit. 

If your unit has a model number starting with “V”, you have a Versatec unit.

If your unit has a model number starting with "NS" or "ND", you have an Envision unit. 

PRODUCT INFORMATION FOR UNITS, OPTIONS & ACCESSORIES

Summary of Contents for Geothermal heating and cooling system



































































Reviews: