23
the next period starts or when RUN PROGRAM is pressed.
C
HANGING
T
EMPERATURE
S
ETTING
I
NDEFINITELY
1. Press HOLD TEMP.
2. Press INCREASE ▲ or DECREASE ▼ key to change the setting, if desired.
3. Press HEAT/COOL SETTINGS to change between heat and cool settings.
4. Press INCREASE ▲ or DECREASE ▼ key to adjust temperature settings.
5. Press RUN PROGRAM to cancel the Hold and to return to the program.
C
HANGING
T
EMPERATURE
S
ETTING
U
NTIL
A
D
ESIGNATED
D
AY
AND
P
ERIOD
1. Press HOLD TEMP twice.
2. Press TIME ▲ or TIME ▼ until the desired number of days is displayed (1 to 255 days).
3. Press WAKE, LEAVE, RETURN or SLEEP to select the period the program will start.
4. Press INCREASE ▲ or DECREASE ▼ key to adjust the temperature setting, if desired.
NOTE:
When the System is set for Auto, both heat and cool settings are needed. If the System is set for Heat, only
the Heat setpoint is needed or if Cool is selected, only the Cool setpoint is needed. Press HEAT/COOL SETTINGS
to change between heat and cool settings.
5. Press INCREASE ▲ or DECREASE ▼ key to adjust the temperature setting, if desired.
IMPORTANT
— If the Hold needs to be cancelled before the designated time, press Run Program to return to the
program.
S
ETTING
S
YSTEM
AND
F
AN
The system default setting is Heat and the fan default setting is Auto. Use the System and Fan keys to change the
settings. The fan settings can be set for each program period individually. The system selection is for all the pro-
gram periods.
System settings control the thermostat operation as follows:
Heat: The thermostat controls the heating.
Off: Both the heating and cooling are off.
Cool: The thermostat controls the cooling.
Auto: The thermostat automatically changes between heating and cooling operation, depending on the indoor
temperature.
Fan settings control the system fan as follows:
On: Fan operates continuously.
Auto: Fan operates with equipment.
V
IEWING
AND
R
ESETTING
T
IMER
S
ETTINGS
When the thermostat activates a timer, the thermostat flashes Filter until the timer resets.
1. Reset the timer by pressing the ( i ) key until the expired timer is displayed.
2. Press the Time ▲ key to reset the timer.
3. Press the Run Program key.
NOTE:
You can view the number of days remaining at anytime by pressing the ( i ) key three or four times. If more
than one timer is active, all active timers show sequentially when pressing the ( i ) key several times.
U
SING
D
AYLIGHT
S
AVINGS
T
IME
F
EATURE
This feature allows you to change in and out of Daylight Savings Time. When the Daylight Time key is pressed in
the fall, the time will go back one hour. In the spring, the time will go ahead one hour and the display will show DST.
Pressing Daylight Time more than once within a five minute period will scroll you through various time options. (Ex-
ample: one hour earlier or later with or without DST). Pressing DAYLIGHT TIME six times in a five minute period will
return you to your original setting.
A
DAPTIVE
I
NTELLIGENT
R
ECOVERY
™
When calculating the time to turn on your unit in order to meet the desired temperature after a setback period, the
thermostat considers many factors and learns from experience. Each day it checks how closely it hit the recovery
target and adjusts the next day recovery start time accordingly. It typically takes four to eight days after installation
for the thermostat to adjust to the local weather, your lifestyle, the construction of your home and your heating/cool-
ing system. The thermostat displays Recovery whenever the thermostat activates the Adaptive Intelligent Recovery
feature.
THERMOSTAT OPERATION
TP32H03 Thermostat - Continued
