4
INSTRUCTION GUIDE: COLOR TOUCHSCREEN COMMUNICATING THERMOSTAT
IG1601EW 06/16
*IG1601EW*
997-012330-14-R
Sound Volume
Adjust the desired sound level of screen buttons when pressed
and the desired sound, either beep, one click, or two clicks.
Background
Select the desired background.
Picture Upload
This thermostat will allow personal photo upload to be displayed
once the thermostat goes into sleep mode. The thermostat
can only accept photos that are tci format. Common photo
formats can be converted to the tci format, which is used by the
thermostat, by using the thermostat photo converter software.
Once the photos have been converted and uploaded to the
thermostat they will be displayed as a slide show when the
thermostat goes into sleep mode. Sleep mode occurs after 5
minutes of inactivity (no screen touches). The photo conversion
software and instructions for uploading the photos can be found
at www.auroracontrols.com
Vacation
(NOTE: This option is not available if configured as a Zone
Thermostat, but is available at the MasterStat.)
1.
From the MENU, press the Vacation button to set vacation
starting date, time, and desired temperature, return date, time.
2.
To cancel this setting, press the CANCEL button.
3.
Press the OK to return to the previous menu.
USB
This screen allows you to import or export the User setting or
Program.
Superboost (Variable Speed Heat Pumps Only)
(NOTE: This option is not available if configured as a Zone
Thermostat, but is available at the MasterStat.)
Superboost can be found under the main menu settings of
the thermostat. The Superboost option temporarily enables
a larger cooling capacity range, for example, a large party.
Normal cooling mode is limited to compressor speeds 1-9 and
Superboost allows compressor speeds 10-12 if needed. This
screen will allow the homeowner to turn on or off the Superboost
option. The Superboost option will be enabled, by default, for a
24-hour period of time and then will automatically be disabled.
CAUTION
: Continuous use of Superboost will result in
the overheating of the ground loop.
On Peak
(NOTE: This option is not available if configured as a Zone
Thermostat, but is available at the MasterStat.)
This screen allows you to adjust the desired On Peak
temperature.
Energy Monitor (If Installed)
(NOTE: This option is not available if configured as a Zone
Thermostat, but is available at the MasterStat.)
1.
If your heat pump has Energy Monitoring installed, the energy
consumed can be viewed by pressing the Energy button.
2.
There are three choices to view the energy consumed:
Instant, Daily, and Monthly.
Instantaneous Energy Use screen
