Installation and connection
05.06.2015
22 / 80
Copyright
2013 by: WATERKOTTE GmbH. Subject to changes.
6.2.7
Installation of the temperature sensor
The temperature sensor has a clamping strap to secure positioning in the
sleeve. Before installing bend the clamping strap in the correct
position (see Figure 9).
Then push the temperature sensor into the clamping
strap of the hot water tank to the end position.
Connect the temperature sensor to the connection terminal
(Terminal configuration see chap. 10.3).
Figure 9: Temperature sensor with clamping strap (see pointing arrow)
Figure 10: Clamping strap with temperature sensor of the hot water tank
Figure 11: Temperature sensor at the end position