BLUPURA
Fizz 80
Manual
Page 26 ‐ Revision: 11‐2‐2018
MAINTENANCE
MAINTENANCE SCHEDULE
Process
Frequency
Water Circuit Sanitization
*Instructions are included in
this manual.
1. Upon Installation
2. When hydraulic components are replaced.
3. Each filter change
4. At a minimum must sanitize once a year.
Filter Change
*Instructions are in instruction
manual present in every
cartridge.
1. Depending on the filtration capacity
2. After each filter change, replace filter
Cleaning Internal Components
Every sanitization and cartridge change.
*Remove accumulation of dust, sand or other particulates
with a disposable cloth.
Cleaning of Refrigeration
Condenser
Every 6 Months
*Remove accumulation of dust from the refrigeration
condenser with a plastic brush.
Cleaning the mechanical water
filter of the Inlet Safety Valve
*Instructions are in instruction
manual present in every
cartridge.
Depending on the hardness of supply water (feed water).
Water Analysis
Yearly.
Check the bacteriological parameters to verify that the
water’s quality complies with current regulations.
