Ecostream
Manual
Page 10 - Revision: 11-13-2020
OPERATING INSTRUCTIONS
The above picture shows front user interface (UI) and control panel for the
ECOSTREAM Water
Treatment System.
For Cold Water:
Press Dispensing button.
For Hot Water:
Press Hot Water Select Button followed by the Dispensing Button (within
3 seconds).
For Ambient Water: Press Room Water Select Button followed by the Dispensing Button
(within 3 seconds).
NOTE:
Default selection mode is Cold Water. Selection will return to default after 3 seconds of
inactivity.
NOTE:
The Hot selection indication light will turn red when pressed, and the Dispensing button
will flash red when Hot Water dispense is selected. The Room selection indication light will turn
green, and the Dispensing button will flash green when Room water dispense is selected.
Ambient
Water Select
Hot Water
Select
Dispensing Button
