P2 Classe
Manual
Page 6 – Revision: 3-2-2021
P2 CLASSE FEATURES AND BENEFITS
Sparkling and Still Cold Water
Counter Top and Cabinet Models come standard with Sparkling and Still Cold Water Selections
to meet a wide range of customer demands. Cold Water Temperature is not adjustable.
Programmable Volumetric Dispense Settings
The
P2 Classe
is equipped with programmable volumetric dispense settings. Using the dispense
buttons, preset volumes of water dispensed can be configured for each of the 4 dispense
buttons.
Large Dispense Area with Adjustable (and Removeable) Drip Tray
12.25” from Faucet to drip tray allow for a wide range of water containers. The Drip Tray height
can also be adjusted to accommodate for filling of standardized containers. The Drip Tray is also
removeable to easily dump any water that has overflowed or spilled during dispense.
Firewall Advanced Purification
Firewall is a proprietary technology that places the UV lamp at the point of dispense. This point
of dispense purification keeps the dispense nozzle free from external contamination as well as
purifying the water, making the freshest water possible.
Ice Bath Drain Port
The
P2 Classe
is equipped with a drain port to the ice bath. This makes for easier maintenance
as well to ease transport if needed.
Energy Saver
The
P2 Classe
comes from the factory with Energy Saver active. For the
Classe
to comply with
Energy Star, the energy saver must come activated (ON) from the factory. When no buttons are
pressed on the front user interface panel, the machine will automatically enter energy saver
mode after 3 hours of inactivity, and the compressor cycle will be set to a 20 hour cycle. When
any one of the front buttons are pressed while the system is in energy saver mode, the
Classe
will exit energy saver mode, and the compressor will enter its normal operation mode. Energy
saver can be disabled/enabled by using the small black button on the back of the machine
labeled “sleep mode”. While sleep mode is inactive, the 4
th
LED (crescent moon) will NOT be lit.
When it has entered energy saving mode, the 4
th
LED (crescent moon) will be lit.
