Dispensing your choice of water is very simple.
1.
Place your cup centrally in the dispensing area. Always use a cup suitable for use with hot
water. Never hold cup or place hands in dispensing area while dispensing hot water. Never try
to fill more than one cup at a time. The drip tray can be removed for filling bottles or other
containers.
2.
Select the type of water you wish to be dispensed by press/touching the cold, ambient or hot
water select icon until it illuminates.
3.
Select the dispense button in the middle of the panel to dispense water.
a.
Cold and ambient water are dispensed automatically via a Push-To-Dispense method
through the FIREWALL UV purification system to ensure the safety of the water. Select
and hold the dispense button to start the flow of ambient or ambient water, holding the
dispensing button to stop the flow once your cup has reached the desired level.
b.
Hot Water is dispensed via a Push-To-Dispense method. Press and hold the dispense
button until your cup has reached the desired level.
WARNING!
Unit produces Very Hot Water up to 203°F. Water above 125°F can cause severe
burns or scalding. Keep unauthorized people and children away from the unit to avoid accidental
dispensing of hot water. Children should not use without supervision.
WARNING!
Always use a ceramic cup or a cup suitable for use with hot water.
WARNING!
Do not hold cup or place hands in dispensing area while dispensing hot water.
WARNING!
Never try to fill more than one cup at a time.
CUBE
Operating, Installation, and Service Manual
Page 9 - Revision: 6-23-2015
