WL270
Manual
Page 53 – Revision 3‐4‐2019
RESETTING THE HOT TANK OVERLOAD OR HIGH LIMIT SAFETY
1.
Turn off Red Heater and Compressor Power Switch
O = OFF
on rear of unit.
2.
Unplug the Power Cord from rear of unit.
3.
Remove 4 Phillip Screws from the Access Panel on rear
of unit and Lower Access Panel.
4.
Locate protective metal box on rear of Hot Tank. Push down on top of metal box to
access thermostat and overload
5.
Press the reset button
6.
Reattach the metal box by depressing the top flap of the metal box so it snaps back into
its original position on the Hot Tank.
