WL3 FX
Manual
Page 51 - Revision: 7-27-2022
PRE-INSTALLATION PROCEDURES
DANGER!
ELECTRICAL SHOCK HAZARD.
Only qualified personnel who have read and understand this entire manual should
attempt to install, or service this
WL3 FX
Water Treatment System
, failure to do so could
result in death or serious injury. DO NOT plug into an electrical supply until specifically
instructed.
WARNING!
ALWAYS SANITIZE BEFORE USE.
Sanitize before use to eliminate any potential microbiological contaminates.
CAUTION!
DRIP TRAY DRAIN.
If you intend to provide a drip tray drain for your customer, be aware that
you will be called multiple times per month to service and unclog the
tubing leading away from the drip tray to drain. Users will clog the drain
with paper clips, erasers, napkins, tea bags, gum, and various other
intended items. Waterlogic recommends you establish a minimum of
weekly visits to the machine for cleaning of the drip tray drain.
Materials Needed:
•
Personal Protective Equipment. Rubber or Nitrile Safety Gloves and Protective Eyewear
•
Phillips Screwdriver
•
Temperature Gage
•
Water Pitcher or Container to collect water from the faucet
•
5-gallon container or drain basin
•
Sanitizer - Household Bleach (5.25% Sodium Hypochlorite) or Citric Acid Based Cleaner
•
¼” Plastic Tubing, at least 4 feet in length
, and assorted
¼”
quick connect fittings
•
TDS Meter and Test Strips for measuring chlorine - Optional
1.
Unpack the
Waterlogic WL3 FX Water Treatment System
and check exterior for damage.
Flush Filters
CAUTION!
FILTER FLUSH REQUIRED.
WL3 FX
’
s Water Treatment Systems
are not supplied with filters. Filters should be
configured to optimize your system. Filters need to be configured and specified to do the job
given the local water conditions, usage, maintenance schedule, and placement restrictions.
In order for our filters to perform as represented and to provide the best quality water
possible, it is essential that filters be replaced periodically. The frequency of filter changes
depends upon your water quality and your water usage. For example, if there is a lot of
sediment and/or particles in your water, then you will have to change your filters more
frequently than a location with little to no sediment. Be sure to replace your filters whenever
