WL3 FX
Manual
Page 6 - Revision: 7-27-2022
WL3 FX FEATURES AND BENEFITS
Cold, Ambient, and Hot Water
Counter Top and Tower Models come standard with Cold, Hot, Extra Hot, and Ambient Water
Selections to meet a wide range of customer demands.
High Volume Storage and Water Capacity
Tower Model has 4 liters of Cold Water Capacity and 1.5 Liters of Hot Water Capacity.
Counter Top has 2 liters of Cold Water Capacity and 1.5 Liters of Hot Water Capacity.
BioCote® Anti-Microbial Protection
Certain plastic, silicon, and painted surfaces surrounding the dispensing areas and
drip tray are infused with an exclusive additive called BioCote®. BioCote® provides
an effective barrier against microbes like bacteria and mold, which may cause odors
or staining
Large Dispense Area with Recessed Faucet
9.25 inch dispense height with BioCote® recessed faucet to protect from cross-contamination.
Leak Prevention
WL3 FX
Water Treatment Systems
are
supplied with an extra solenoid to provide redundant
protection and reduces accident potential.
Child Safeguard
The
WL3 FX
Water Treatment System
with Hot Water requires the Hot Water selection icon be
double-tapped and held to dispense Hot Water. Note there is a 2 second delay until hot water
begins flowing. It will default back to the Cold selection after 3 seconds of inactivity to prevent
accidental dispensing of Hot Water.
Firewall
TM
Firewall is proprietary technology that places the UV lamp at the point of dispense. This point of
dispense purification keeps the dispense nozzle free from external contamination as well as
purifying the water, making the freshest water possible.
Energy Saver
The
WL3 FX
Water Treatment System
comes from the factory with Energy Saver active. For the
WL3 FX to comply with Energy Star, the energy saver must come activated (ON) from the
factory. When no buttons are pressed on the front user interface panel for 3 hours, the
machine will automatically enter energy saver mode, and the heater to the hot tank will be
turned OFF. When any one of the front buttons are pressed while the system is in energy saver
mode, the WL3 FX will exit energy saver mode, and the hot tank will begin heating water. The
hot water tank will be at set temperature within 10-minutes after exiting energy saver mode.
Energy saver can be disabled by adjusting dipswitch #2, shown on Page 59 of this manual. While
the unit is in sleep mode, the “Power” LED will slowly fade then illuminate continuously, while
all other LEDs will be off.
