WL3 FX
Manual
Page 62 - Revision: 7-27-2022
RESETTING THE FILTER TIMER
If the
WL3 FX Water Treatment System
has the Filter Timer dipswitches set to 3,
6, or 12 months, and the selected period has passed, the Filtration LED will begin
blinking. This warning indicates that the filters need to be changed, and will
continue until the timer has been reset, OR the Filter Timer has been set to
“NONE.”
To reset the filter timer, simply depress
AND
HOLD
both the Cold
AND
Hot
dispense buttons simultaneously for 15 seconds. A brief audible alarm will sound,
indicating the timer has been reset. Release the buttons once it sounds.
PRESS AND HOLD
FOR 15 SEC
