WL350 Operating, Installation, and Service Manual Page 23 – Revision 8-30-2016
PROGRAMMING INSTRUCTIONS
CHANGING HOT WATER MODE TO AMBIENT WATER
WL350 Water Treatment Systems comes with set to Hot / Cold, which can be changed to
Ambient / Cold settings. On the
Energy Saver PCB,
Move the Jumper on JP9 from Pins 1 and 2 to
Pins 2 and 3.
Unplug Power Cord and remove Top Cover to access Energy Saver PCB.
WL350 Water Treatment Systems comes with Hot and
Cold Water factory settings.
PCB Jumper JP9 in positions - Pin 1 and 2
Change to Ambient and Cold by moving PCB Jumper
JP9 to positions – Pin 2 and 3
Energy Saver PCB – P/N EN-6131 – WLCP PN 20-0075
1
2
1
2
3
Pin Numbers
2
3
