WL350
Manual
Page 17 – Revision 11‐21‐2018
6.
For demonstrative purposes, photos below have lowered the hot tank from the unit
.
Press the reset button
7.
Reattach the Protective Metal Box by depressing the top
flap of the Protective Metal Box so it snaps back into its
original position on the Hot Tank.
8.
Replace the Lower Front Panel.
9.
Plug in the Power Cord.
10.
Turn on the Red Compressor/Heater Switch
I=ON
position
The Hot and Cold tanks must be filled with water BEFORE turning on the
Red Heater and Compressor Switch.
11.
Verify the cooler is fully operational before installing it at the customers’ site.
Summary of Contents for WL350
Page 3: ...WL350 Manual Page 15 Revision 11 21 2018 HEATER CIRCUIT HOT TANK WIRING...
Page 8: ...WL350 Manual Page 20 Revision 11 21 2018 FIREWALL OUTLET SOLENOID REVERSE FLOW ORIENTATION...
Page 29: ...WL350 Manual Page 41 Revision 11 21 2018 WL350 COUNTER TOP WATER FLOW DIAGRAM...
Page 30: ...WL350 Manual Page 42 Revision 11 21 2018 WL350 TOWER WATER FLOW DIAGRAM...