WL380
Manual
Page 44 ‐ Revision: 2‐5‐2018
3. Dispensing Won’t Stop When Not Holding the Dispensing Button
Possible Reason
Solution
Bad Display PCB
Replace Main PCB
Debris in the Solenoid
Inspect Solenoid for debris and clean out as needed.
Damaged or Faulty Solenoid
Replace Solenoid.
4. Steady Drip Out of Faucet
Possible Reason
Solution
Debris in Solenoid
Inspect Solenoid for debris and clean out as needed.
5. Hot Water or Steam Coming out of both the Faucet and Vent Hole
Possible Reason
Solution
Improper tubing attachment
from the Hot Tank to Faucet or
vice versa.
Check that the tubing is connected from Hot Tank Outlets to
correct Faucet attachments. Connect tubing to outlets as
needed.
