Assembly and Operating Instructions Fast Set Pool “WATERFUN”
12
English
3M
CONNECTING AND OPERATING
THE SAND FILTER SYSTEM:
The sand filter system must be installed with
a sufficient distance of at least 3 meters from
the pool. This is necessary for safety reasons
to ensure that no live (current-carrying) parts
can be touched from inside the pool/when
in the water. The filter system should be
operated when the pool is not used and there
are no people in the water.
Place the filter system on a firm foundation
(e.g. a concrete slab), never directly on the
lawn. The power supply of the filter system
must be protected by a residual current circuit
breaker. It should not be connected via an
extension cable. The actual assembly of the
sand filter system is carried out as described
in the detailed enclosed instructions. The filter
system is connected to the pool according to
the following drawing.
TIP:
To achieve an even better mechanical
cleaning of your pool, we recommend to
connect a skimmer (not included in delivery).
The skimmer is attached (hinged) to the top
of the tube ring (bead) and connected to the
suction side of the sand filter unit from inside
the pool. A skimmer generates a suction
effect on the water surface, and allows, for
example, leaves to be skimmed/removed by
suction before they sink to the bottom of the
pool.
Suitable skimmer = article no.: 58233
38mm
RETURN
32mm
Filter
