Safety
Introduction
Product Overview
Installation
Operation
Maintenance
Troubleshooting
Warranty
37 | 44
Do not operate beyond
recommended pressure.
Liquid ejected at high
pressure can cause
serious injury.
High Pressure
•
•
Do not operate while all discharges or drains are closed. High pressure
will result and damage to foam system, its components or leaks may
occur.
Relieving Waterline Pressure
Open and close the pump drain valve to relieve pressure in the water line
).
Relieving Airline Pressure
The airline will bleed off over time. Open the auxiliary air outlet to vent the
compressed air or pull the pop off valve to immediately relieve pressure
).
Do not touch the surface
during operation––allow
it to cool after operating.
Hot surface can burn you.
Hot Surface
•
•
Do not service the equipment directly after operation. Allow the
equipment to cool before servicing.
Servicing the Sump
Oil from the sump cools and lubricates the compressor system. Regular
maintenance is necessary for efficient operation and to prevent premature
failure. Use only ISO AW68 or equivalent anti wear, low/anti foaming hydraulic
oil.
Summary of Contents for ECLIPSE CAFSystem 2.0
Page 2: ......
