4
|
56
Safety Precautions
•
Read and understand all the associated documentation before you begin the
installation.
•
Read and understand all the notices and safety precautions.
•
Be aware that these instructions are only guidelines and are not meant to be
definitive. Contact Waterous when you have questions about installing,
operating, or maintaining the equipment.
•
Do not install the equipment if you are not familiar with the tools and skills
needed to safely perform the required procedures—proper installation is the
responsibility of the purchaser.
•
Do not operate the equipment when safety guards are removed.
•
Do not modify the equipment.
•
Regularly check for leaks, worn, or deteriorated parts.
NOTICE
Before Operation
• Read and understand all
the instructions provided.
• Check all fluid levels
and replenish if necessary.
• Remove all shipping plugs
and install the operation
plugs or caps.
NOTICE
• Do not prime the pump for
more than 1 minute.
• Operating the priming pump
more than 1 minute can
damage the motor or the
motor solenoid.
Priming Pump Damage
Summary of Contents for VPO Priming System
Page 2: ......
Page 11: ...Notes...