WaterRatGear Water Rat Boot Dryer Manual Download

Page: 3 / 4

3: HOW DOES IT WORK?

Plug the fans into any 5.5V USB power supply, in your car, house, or a portable power bank battery.

The magic is in the shape of the

fan housing.

It lets fresh air in from the top of

the boot and wet air is pushed

out through the 4 vents

To check you have air flow you

can dangle a thin strip of tissue

in the boot see the air

movement like this feather

Don’t let it get sucked into the

fan!

The dryer pushes air right down

into the bottom of the boot

first,

So, all the wet air gets pushed

out with fresh air, then the boot

dry’s

Summary of Contents for Water Rat Boot Dryer

Page 1: ...u can dry 2 boots at once these quantities are for 1 boot dryer 1x Fan with housing guard and usb cable 1x Nozzle with curved end to stop boot damage during insertion 2x Extension pieces for longer bo...

Page 2: ...t the dryer in position open the boot and wiggle the dryer in the same as you would with your foot For tiny boots try leaving the elbow piece off just fit the nozzle onto the straight extension pieces...

Page 3: ...esh air in from the top of the boot and wet air is pushed out through the 4 vents To check you have air flow you can dangle a thin strip of tissue in the boot see the air movement like this feather Do...

Page 4: ...For less wet boots damp or sweaty or a warmer room it will be quicker again The result is dry comfortable boots to wear improved health and no mould smell 5 NOISE LEVEL One dryer fan running 50dB 1m...