Step 1
Remove the aerator from the faucet / tap and connect
the aerator-adaptor to the tap.
Step 2
Wrap the connector thread of the adaptor with Teflon
tape to prevent leaks. Ensure at least 2 washers are
inserted into the top connector of the CLEO.
Step 3
Align the top connector of the
CLEO with the aerator-
adaptor & rotate clockwise to tighten.
Step 4
Flushing – Turn on the water and step away from the
path of the water. Let the water flow out for 3 minutes.
This will flush out discoloured water – this is just carbon
dust, and it is not harmful.
Use a spanner to tighten fully. If there are leaks,
check/insert washer and tighten again.
CLEO will fit on all standard taps & faucets with a 24 mm
aerator.
Installation on
Taps & faucets
Summary of Contents for Cleo SFU-717
