Step 1
Hold the top body of the CLEO Shower & Tap filter firmly
and turn the bottom body counter-clockwise to open
the filter unit and remove the cartridge.
Step 2
Gently tap the sides of the cartridge with the supplied
spanner or against the wall to loosen lumps that may
have formed inside.
Step 3
Flip cartridge and insert it
in to the bottom
Blue side up
shell cavity. Align the treads of the top & bottom and
rotate clockwise to tighten fully.
Step 4
Reverse Flushing – Turn on the water and step away
from the path of the water. Let the water flow out for 3
to 5 minutes. This will flush out most of the sediments
trapped inside.
If there is severe clogging, repeat steps 2 and 3.
Step 5
Re-insert the cartridge
in to the bottom
Red side up
shell cavity, align to the top shell and close the filter.
Instructions for
Cartridge cleaning / reverse flushing
Summary of Contents for Cleo SFU-717
