Watersnake Stealth Bow Mount Motor Manual ( Ver.1)
30
HOW TO PAIR THE REMOTE
CONTROL TO THE MOTOR
If the remote control unit becomes unpaired
and cannot be connected to the motor
( No green status light ) please take the
following steps.
STEP 1:
Deploy the motor and press the power
button ( On/Off ) to power up the motor.
STEP 2:
Power up remote control by holding down
the On/Off button until the remote control
unit light activates. The light will fl ash
red then green then blue then continue
to fl ash green.
STEP 3:
Press the Max Speed (M) button and the
blank button on the remote at the same
time, until the fl ashing green light on
the remote starts to fl ash faster then
release.
STEP 4:
Press the Pair button on the Stealth
bow mount bracket for two or three
seconds. When you hear the shave and
haircut jingle and the light on the remote
turns from fl ashing to a solid green your
remote unit will be synced to the motor.
M
ON / OFF button
Max Speed button
Pair button
Power button
Blank button
YOUR REMOTE SHOULD NOW BE CONNECTED.
Test that the remote control unit controls the motor as expected. If it doesn’t
turn the motor or spin the propeller, repeat steps 3 and 4.
Summary of Contents for STEALTH 54LB/48
Page 44: ...Watersnake Stealth Bow Mount Motor Manual Ver 1 44 SCHEMATICS AND PARTS LIST...
Page 46: ...Watersnake Stealth Bow Mount Motor Manual Ver 1 46 SCHEMATICS AND PARTS LIST...
Page 50: ...Watersnake Stealth Bow Mount Motor Manual Ver 1 50 NOTES...
Page 51: ...www watersnake com au 51 NOTES...
