5
NEOTP500 MAIN SCREEN CONTROL
The Main Screen displays current time, water temperature, spa setting temperature, and status of the system accessories in the center of the screen. To
change spa set temperature, tap the spa set temperature number. Select the appropriate temperature level and tap SAVE to save the desired setting or
EXIT to reverse back to the last setting without saving the setting.
NOTE:
For configurations with Swim Spa and/or Therapy, turn OFF Swim mode or Therapy mode in order to adjust the Set Temperature.
When Swim Spa and/or Therapy is ON, instead of the current temperature, it will display the current speed/therapy number. In this case, tap the number
to change the swim speed/therapy number. Select the appropriate speed/therapy number and tap SAVE to save the desired setting or EXIT to reverse
back to the last setting without saving the setting.
See
MAIN SCREEN CONTROL & STATUS ICONS
page 4.
The left side of the screen shows all device icons available for the current configuration. Turn system accessories ON and OFF by tapping the
appropriate icon on the left side of panel (LIGHT, JET 1, BLOWER, JET 2…). These accessories have timeout defaults from the manufacturer
and will turn OFF automatically after the time has expired. Default timeout for LIGHT is 60 minutes; BLOWER is 15 minutes; JET at low speed
is 60 minutes; and JET at high speed is 15 minutes. Users can change these times in DEVICE TIMEOUT setting menu.
MUSIC:
Tap this icon to control music from your Bluetooth device.
MENU NAVIGATION:
Swipe Main Screen from right to left to go to Setting Screen. In Setting Screen swipe from left to right to return to Main Screen.
To change the setting, tap the appropriate icons to enter the sub-menu and change the setting.
In order to play media from a Bluetooth device to a Spa with a
NEO 2100 & Bluetooth module:
• Open the Bluetooth settings for your device
(phone, tablet, computer).
• Connect your device (phone, tablet, computer) to the ‘HotTub- …’
Bluetooth device.
• On your paired device (phone, tablet, computer), select the music
or video that you would like to play.
• Select the ‘Music/Bluetooth’ icon on the Home screen of the
TP500 to control playback of your device.
Opens the Volume Control to adjust Volume
Selects the Previous song if a play list is being played.
Play or Pause the current song.
Disconnect the paired Bluetooth device.
Connect the paired Bluetooth device.
NOTE: If you do not see your HotTub-… listed, turn the Breaker to
Spa Off for one minute, then on again.
Selecting the icon will open the Bluetooth Music App.
After changing a setting tap
SAVE
icon to save the setting.
Tap
RETURN
icon to go back to the previous screen.
Tap
HOME
icon to go back to the Main Screen.
