PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
PAGE 3 OF 4 | UPDATED ON 4.29.2021
STYLE No.
EEBT01
Emile 67” x 27” x 27-1/2” Freestanding Oval
Cast Iron Bathtub
INSTALLATION GUIDELINES
9. Slide a COMPRESSION NUT and RING onto the
DRAIN PIPE then connect the TEE to the PIPE.
7. Apply adequate non-staining plumber’s putty or
silicone to the DRAIN FLANGE then thread and
securely tighten the FLANGE into the DRAIN
SHOE.
8. Slide a COMPRESSION NUT and RING onto the
OVERFLOW PIPE then insert the PIPE into the TEE.
10. Using the appropriate GASKET, thread and securely
tighten the COVER SCREW into the OVERFLOW
SHOE.
11. Slide a COMPRESSION RING, COMPRESSION NUT
and the ESCUTCHEON onto the TAILPIECE then
apply pipe thread sealant to the TAILPIECE and
thread it into the TEE.
12. Position the BATHTUB so the TAILPIECE passes
through the hole in FLOOR and ensure the
BATHTUB sits level.
NOTE:
The BATHTUB includes adjustable levelers.
DRAIN SHOE
RUBBER
GASKET
BATHTUB
DRAIN
FLANGE †
† APPLY
PLUMBER'S
PUTTY OR SILICONE
OVERFLOW PIPE
COMPRESSION NUT
COMPRESSION RING
TEE
DRAIN PIPE
COMPRESSION NUT
COMPRESSION RING
TEE
OVERFLOW
SHOE
OVERFLOW
GASKET
OVERFLOW
COVER
COVER
SCREW
TEE
ESCUTCHEON
COMPRE-
SSION
NUT
COMPRESSION
RING
TAILPIECE
[THREAD
SEALANT]
FLOOR
BATHTUB
[ENSURE TUB
SITS LEVEL]
DRAIN HOLE
TAILPIECE
