6
www.waterworkswindowcleaning.co.uk
Installation Guide
Remove PowerUPHD from its
protective packaging and place on
a flat surface. Set this packaging
aside as returns by post are only
accepted in original packaging.
Choose a safe position in the van,
away from any doors and free from
any obstructions. PowerUPHD
dimensions are 500mm x 300mm x
500mm high.
Make sure the position you’ve
chosen will allow connection to
your battery and fixing of the
momentary push button switch.
Cabling can be extended by others
if necessary 2.5mm, 2 core flex.
Offer the PowerUPHD into your
chosen area and mark up the x 4
fixing holes on the bottom of the
reel. If access is difficult around the
motor, x 3 fixings will be sufficient
in most cases.