Watkins Wellness COVER CRADLE, Installation Manual

2

Cordless Drill 

Flat Head Screwdriver

7/16” Socket with 

Ratchet

#2 Square Drive Bit

1/8” Drill Bit

Fine Tip Marker

1/2” Wrench

Safety Glasses

INSTALLATION REQUIREMENTS

TOOLS REQUIRED

IMPORTANT INFORMATION

•  One Technician is recommended for this installation.

•  Read all of the instructions thoroughly before performing this installation.

•  There must be a minimum of 30” clearance between the wall and the retracting side of the spa 

for cover to operate properly and 4” on each side for Side Arm clearance.

•  The Warning Label on the cover is always the front of the cover; the lifter will attach on either the 

back side of the spa or the left side of spa depending on cover confi guration.

•  The cover side with the Warning Label will always fold over to the side without the Warning Label.

•  To ensure that the cover seals correctly, the spa must be level.

•  Use screws in bag #2 on spas with non-removable panels.

•  Use screws in bag #3 on spas with removable panels.

•  Use screws in bag #4 on panels of spas with metal or plastic frames.