background image

Page 32

HYDROMASSAGE JETS

The Hydromassage jets have two different nozzle options: directional and dual port rotary. The directional nozzle allows you to aim the water in the
direction that feels best. The dual port rotary nozzle divides the water flow into two streams, and then spins. 

A

AC

CC

CE

ES

SS

SO

OR

RY

Y  N

NO

OT

TE

E:: Your Hot Spring

®

dealer stocks hydromassage jet kits which can easily be installed in your spa to modify your jets from

directional to dual port rotary.

SOOTHING SEVEN

®

JET

The Soothing Seven jet is another unique feature of Hot Spring spas. Its seven outlets are designed to massage the muscles in the upper back
and shoulders, gently and thoroughly. Turn the faceplate clockwise to increase the jet pressure and counterclockwise to decrease the jet pressure.

PRECISION

®

JETS  

Precision jets are located above Moto-Massage

®

jets (except Accolade

and Prodigy

®

spas) and in groups of various sizes in the Vista

®

, Grandee

®

,

Envoy

®

, Vanguard

®

, Sovereign

®

, Accolade and Prodigy models. They are designed to perform a soft, soothing massage on your back and

shoulders. Adjust the pressure of the Precision jets using the Comfort Control

®

lever (located closest to the Precision jets).

Refer to the drawings on the following pages to familiarize yourself with the SmartJet

®

system menus for your spa. Please note that the SmartJet

lever side of the spa is always considered the front when referring to the locations of the different types of jets and jet systems. T

Thhee  ccllo

occkk

p

po

ossiittiio

onnss  aarree  cco

orrrreecctt  w

whheenn  ffaacciinng

g  tthhee  ssp

paa,,  ssttaannd

diinng

g  aatt  tthhee  S

Sm

maarrttJJeett lleevveerr..

JETSTREAM

®

JET

The JetStream jet is a large orifice hydromassage jet designed to put maximum massaging action on a specific area of the body. It is located in the
lower part of the spa to afford optimal access for the massaging of feet, legs, hips, and lower back. The intensity of the JetStream jets can be
altered (except the ones found in the FootWell

®

system) using the Comfort Control lever. JetStream jets located in the FootWell are not adjustable.

HYDROSTREAM

®

JET 

(VISTA, ENVOY, ACCOLADE & JETSETTER [JJ] SPAS ONLY)

The Hydrostream jet is a mid-size hydromassage jet that delivers a great massage to the feet, back and shoulder areas. This jet can be adjusted at
the face plate for greater or lesser intensity.

A

AC

CC

CE

ES

SS

SO

OR

RY

Y N

NO

OT

TE

E:: Your Hot Spring Dealer stocks rotary nozzle HydroStream jet kits that can easily be installed in your Vista or Envoy spa to

modify the jet from directional to dual port rotary.

WATER FEATURE

Vista, Envoy and Accolade spas are equipped with a BellaFontana

water feature. This water feature can be turned on or off when the two-speed

pump is on low speed (tranquil mode) or high speed. To function correctly, the water feature on/off lever must be placed in the 

full on position only.

If the lever is not in the 

full on position when the pump is on high speed, it is likely that the water feature will project water substantially farther out

into the spa as the on/off lever is opened. This is not proper operation. If this occurs, the pump should be turned off, the water feature lever rotated
to the full on position and the pump turned on again.

C

CA

AU

UT

TIIO

ON

N:: Partial blockage of water flow at entrance of water feature will cause the water to flow farther into or over the spa. 

Grandee (GG), Vanguard (VV) and Sovereign (II) models (Sand, Spa Blue, and Pearl spas only) also have a water feature system. The water feature
will either be located on the left or right side of the spa towards the front depending on the model. A lever located next to the waterfall is used to
adjust the water from full flow to completely off. The circulation pump of the spa powers the water feature allowing the water to run all of the time if
desired. Turning the water feature lever to it’s full clockwise position will shut the water feature off.

IIM

MP

PO

OR

RT

TA

AN

NT

T::  IItt  iiss  rreecco

om

mm

meennd

deed

d  tthhaatt  tthhee  w

waatteerr  ffeeaattuurree  ffo

ouunnd

d  o

onn  tthhee  G

Grraannd

deeee,,  V

Vaanng

guuaarrd

d  aannd

d  S

So

ovveerreeiig

gnn  b

bee  ttuurrnneed

d  o

offff b

beeffo

orree

p

pllaacciinng

g  tthhee  cco

ovveerr  o

onntto

o  tthhee    ssp

paa..  

Operating Instructions

Summary of Contents for Hot Spring








































Reviews: