5 - Error Conditions, Problems and Solutions - Message List
32
Océ BLM500 Operator Manual
FLOW ERROR - FORMER
There is an error at the former.
Open the folder cover and remove
the book or books. If necessary,
open the main deck to remove the
book or books.
FLOW ERROR - OUTFEED
There is an error at the outfeed.
Check the outfeed. If necessary,
remove the trim bin and open the
trim stop guard to remove the book
or books.
Fold blade axis moving
The fold blade axis (book thick-
ness adjustment) is moving. This
message clears when the adjust-
ment is complete.
FOLD BLADE NOT PARKED The fold blade is in the wrong posi-
tion. Touch START
to reset the
position.
FORM CLAMP CLOSED
The form clamp is in the wrong
position. Touch START
to reset
the position.
FORM ROLLER ERROR
The form roller is jammed. Clear
the jam and continue.
FORM ROLLER NOT
PARKED
The form roller is in the wrong
position. Touch START
to reset
the position.
GATHERING AREA COVER
OPEN
Close the gathering area cover if
you need to operate the machine
online.
JAM AT BRIDGE INFEED
There is a paper jam at the infeed
to the connecting bridge. Clear the
jam and continue.
See page 39.
JAM AT FORM ROLLER
The form roller is jammed. Open
the folder cover and remove the
jam.
JAM BEFORE TRIMMER
There is a book jammed before the
trimmer. Clear the jam and con-
tinue.
JAM IN CONNECTING
BRIDGE
There is a paper jam in the con-
necting bridge. Clear the jam and
continue.
Message
Information
Reference
