5 - Error Conditions, Problems and Solutions - Message List
Océ BLM500 Operator Manual
33
JAM IN GATHERING AREA
There is a paper jam in the gather-
ing area. Open the connecting
bridge cover, lift the connecting
bridge and remove the paper jam.
See page 39.
JAM IN STACKER AREA
There is a paper jam at the outfeed
of the machine. Remove the
jammed books and continue.
JAM IN STITCHER AREA
There is a paper jam in the stitch
area. Open the folder cover,
remove the paper jam and con-
tinue.
JAM IN TRIMMER
There is a book jammed in the
trimmer. Clear the jam and con-
tinue.
MANUALLY PARK SHUTTLE The shuttle is not parked correctly.
Open the folder cover and move
the shuttle to the park position.
Close the folder cover. The shuttle
will reset. When the message list
is clear, continue operation.
MISSING STITCHES
The machine has detected missed
stitches. Check if the stitch-wire is
jammed or if the stitch-wire spool
is empty.
MOTOR OVERLOAD
The drive motor controller has
reached its power limit. Check for
a paper jam and clear if necessary.
If the problem continues, contact
your service engineer.
REMOVE SET FROM FOLD
AREA
Open the folder cover and remove
the set.
REMOVE SET - GATHER-
ING AREA
Open the gathering area and
remove the sheets. Or touch
'PURGE SET'.
Rotate axis moving
The rotate axis is moving. This
message clears when the adjust-
ment is complete.
Shuttle axis moving
The shuttle axis is moving. This
message clears when the adjust-
ment is complete.
Message
Information
Reference
