5 - Error Conditions, Problems and Solutions - Paper Jams
42
Océ BLM500 Operator Manual
Jam before the Trimmer
Step Action
Information
1
Open the BLM500 main deck.
2
Remove the trim bin.
3
Remove the trimmer infeed con-
veyor.
The procedure can be seen from
the top of the machine.
Access to the parts is through the
trim bin opening.
Hold the shaft and push to the
right, against the spring pressure.
Lift the left hand end clear.
4
Remove the book.
5
Fit the trimmer infeed conveyor.
Insert the right hand end of the
shaft into the bearing, against the
spring pressure. Insert the left
hand end.
6
Fit the trim bin.
7
Close the BLM500 main deck and
covers.
8
If there is paper in the gathering
area, touch
PURGE SET
.
This action clears paper from the
BLM500.
9
Continue the print job.
Trimmer Infeed Conveyor
FIGURE 19. Trimmer Infeed Conveyor viewed from above.
