5 - Error Conditions, Problems and Solutions - Manually park the Shuttle
Océ BLM500 Operator Manual
49
Procedure
Result
The error message ‘MANUALLY PARK SHUTTLE’ is cleared from the screen.
The shuttle axis re-references and the message ‘Shuttle axis moving’ is dis-
played.
When the message list is clear, you can continue operation.
Step
Action
Information
1
Open the folder cover.
See “Open the Folder Cover” on
page 22.
2
Push the shuttle-assembly to the
right.
Figure 22 on page 48 shows the
correct position for the shuttle
assembly.
If the shuttle assembly does not
move to the correct position, push
the pick-up fingers away from
each other by 2-3mm and try
again. Repeat if necessary.
3
Wait until the error message
‘SHUTTLE NOT PARKED’ is
cleared from the screen.
If the message does not clear,
check that the shuttle assembly is
in the correct position. Repeat
Step 2 if necessary.
4
Close the folder cover.
