6 - Maintenance - Install New Stitch-wire
62
Océ BLM500 User Manual
Close the BLM500
Feed the Stitch-wire
Step
Action
Information
1
Close the stitch wire cabinet.
2
Lower the BLM500 main deck.
3
Lower the clincher frame.
See “Lower the Clincher Frame”
on page 24.
4
Close the folder cover.
5
Close the connecting bridge cover.
Step
Action
Information
1
Connect the BLM500 to the mains
power supply.
2
Turn on the BLM500.
3
Set the number of stitches to 6.
See “Job Setting for a Standard
Paper Size” on page 7.
4
Hand-feed or print an A4 or larger
size test job.
The stitch-wire loads automati-
cally during the stitch head cycle.
5
Check the stitch-wire is loaded.
Check that a stitch is made. If
needed, repeat the previous step.
6
Reset the number of stitches on
the touch screen.
