Océ BLM500 User Manual
21
CHAPTER 4
Standard Tasks
Introduction
This chapter describes the standard tasks that are needed in the day-to-day
operation of your BLM500.
Load and Save the Job Settings
Introduction
The current job settings can be saved to the memory and reloaded for use
again at a later date. Load the ‘Default Job Template’ to reset the BLM500 to
normal settings.
Save a job
1. Touch
LOAD & SAVE
> SAVE.
2. If these options appear, select one.
REPLACE
to over-write the previous job with the current job settings.
SAVE NEW
to save the current job with a new name.
CANCEL
to cancel the job save.
3. Enter the name for the job on the keyboard
4. Touch
OK
or
CLOSE
.
Load a job
1. Touch
LOAD & SAVE
.
2. Touch the job name or use the Up arrow and the Down arrow to select the
job.
3. Touch
LOAD
.
4. Wait until the BLM500 has made the adjustments.
