4 - Standard Tasks - Empty the Trim Bin
26
Océ BLM500 User Manual
Empty the Trim Bin
When to do
• An error message is displayed on the touch screen when the trim bin is full.
• You can empty the trim bin when you choose. For example, before you start
a print job.
Note
The BLM500 operates with the trim bin removed for a short time. The printer
waits while the trim bin is removed, then continues when the trim bin is
replaced. To prevent lost production, you must remove, empty and return the
trim bin to the BLM500 as quickly as possible.
Procedure
1. Use the handle to open the trim bin.
2. Use the side handles to lift and remove the trim bin.
3. Empty the trim bin
4. Fit the bottom of the trim bin over the mounting rail.
5. Push the trim bin closed at the top.
Open the Stitch-Wire Cabinet
When to do
• To see if the stitch-wire is jammed or finished. An error message is displayed
on the touch screen when the stitch-wire is jammed or finished.
FIGURE 13. Trim Bin Open
Trim Bin Side Handle
Trim Bin open
