4 - Standard Tasks - Adjust the Stacker Collection Table
Océ BLM500 User Manual
27
• To install a new stitch-wire spool. See “Install New Stitch-wire” on page 58.
Procedure
1. Open the stitch-wire cabinet cover. The cover is held closed by a magnetic
catch.
Adjust the Stacker Collection Table
The collection table must be in the correct position for the stacker to operate.
The position of the collection table depends on the finished size of the job.
When to do
• When you start a new job
• If the books do not stack correctly
FIGURE 14. Stitch-wire Cabinet
Stitch-wire Cabinet open
FIGURE 15. Collection Table Positions
Insert the collection table into one of
the three pairs of slots.
