6 - Maintenance - Clean the the Polyurethane Strips in the Form Clamp
Océ BLM500 User Manual
55
Procedure
Check
The book is delivered to the stacker. Check the book. Repeat the procedure
until the book spine is clean.
Clean the the Polyurethane Strips in the Form Clamp
When to do
Follow this procedure if there are dirty marks near the spine on the front and
back cover of the book. Ink and toner can collect on these parts, especially
when you make thin books.
Materials description
• Alcohol wipe
Article number 1060060887
• or a lint free cloth and alcohol (isopropanol)
CAUTION
Only use alcohol to clean this part of the machine. Other chemicals can dam-
age the machine.
Note
If you push the eject rollers, the rollers can move together against your hand.
This movement can alarm you, but is not dangerous.
Step
Action
Information
1
Enter the correct settings on the
touch screen.
• Set the touch screen to the cor-
rect
PAPER SIZE.
• Set the
SET THICKNESS
to
4.0
.
• Set the number of
STITCHES
to
0
.
•
Set the number of
FORMS
to
4
.
2
Open the connecting bridge cover.
3
Lift the gathering area cover.
4
Put 4mm of clean paper in the
gathering area.
5
Close the gathering area cover
6
Close the connecting bridge cover.
7
Touch PURGE SET.
