6 - Maintenance - Install New Stitch-wire
Océ BLM500 User Manual
59
Before You Begin
Remove the Stitch-wire from the Stitch Head
Step
Action
Information
1
Turn off the BLM500.
Use the mains power ON/OFF
switch. See Figure 3 on page 4.
2
Disconnect the BLM500 from the
mains power supply.
3
Lift the BLM500 main deck.
See “Lift the BLM500 Main Deck”
on page 25.
Stitch-wire Guide Block
Stitch-wire
Felt wire-cleaning pads
FIGURE 30. Stitch-wire Guide Block
Step
Action
Information
1
Cut the stitch-wire to the right of
the stitch-wire guide block.
2
Pull the stitch-wire from the stitch-
wire guide block.
3
Fit a new stitch-wire spool.
See “Fit a New Stitch-wire Spool”
on page 60.
Cut here
