User Interface (GUI) - Operator Menu
14
Plockmatic PowerSquare™ 224 - Service Training Workbook
4.3
GUI buttons and options
Window
Buttons
BASIC
PAPER SIZE
PAGE DIRECTION
PRESETS
ROTATE
Enter the paper size
Portrait or Landscape
Standard paper sizes
On or Off
SET THICKNESS
AUTO
SHEET
THICKNESS
Either input the measured set thick-
ness or use AUTO
Auto calculates the set thickness
from the sheet thickness and sheet
count.
Use SHEET THICKNESS to enter
the measured thickness of one sheet
of paper.
STITCHES
STITCH PITCH
AUTO
Number of stitches
Distance between stitches
Automatic stitch pitch setting
FORM
AUTO
NUMBER
PRESSURE
THRESHOLD
Automatic, according to thickness
Number of form roller actions
Pressure to make spine -9 to +9
Minimum thickness for square spine
TRIM
AUTO
Trimmed dimension of the book
Automatic, according to thickness
SIDE TRIM (where fitted)
AUTO
TRIM SIZE
TRIM OFFSET
Trimmed dimension of the book
Automatic, according to PAGE SIZE
Side-trim dimension can be changed
Trim can be biased to top or bottom
LOAD & SAVE
SAVE
REPLACE
CANCEL
SAVE NEW
Save the job
Overwrite the existing job
Cancel the save
Save as a new job
JOB DETAILS
List of the job settings
LOAD
Load a job from memory
PADLOCK SYMBOL
Supervisor use to lock/unlock a job
DELETE
Delete a job
VIEW OF JOB LIST
View A-Z, by use, by index
ADVANCED
RE-REF
Re-calibrate the machine axes
STITCHER UP
Lift the stitch head for maintenance
PURGE SET
MAKE BOOK
Clear the set from the machine
Power and Control
Plockmatic PowerSquare™ 224 - Service Training Workbook
35
10.4
DFA
The DFA Finisher Interface PCB is the interface between the printer and the
finisher.
The following input and output signals are provided:
Status ouput signals from the PSQ
Control input signals from the
printer
LEDs are
RED
. LED 11, 12 & 13 must be ON to
let the PSQ run online.
LEDs are
GREEN
.
LED11
ST0
LED off = Offline
LED19
C0
Sheet exit
LED12
ST1
LED off = Fault
LED20
C1
End of set
LED13
ST2
LED off = Full
LED21
C2
Cycle up
LED14
ST3
Pulse = sheet delivered
LED22
C3
End of job
LED15
ST4
Pulse = set delivered
Sheet Exit
End of set
Cycle up
End of job
Printer
Offline
PowerSquare
Fault
Full
Sheet Delivered
Set Delivered