5 - Error Conditions, Problems and Solutions - Manually park the Shuttle
Watkiss PowerSquare™224 User Manual
101
Procedure
Result
The error message
MANUALLY PARK SHUTTLE
is cleared from the screen. The
shuttle axis re-references and the message
Shuttle axis moving
is displayed.
When the message list is clear, you can continue operation.
Step
Action
Information
1
Open the folder cover.
See “Open and Close the Folder
Cover” on page 34.
2
Push the shuttle-assembly to the
end.
Figure 54 on page 100 shows the
correct position for the shuttle
assembly. The screw ‘A’ must
align with the white gear ‘B’.
If the shuttle assembly does not
move to the correct position, push
the pick-up fingers away from
each other by 2-3mm and try
again. Repeat if necessary.
3
Wait until the error message
SHUT-
TLE NOT PARKED
is cleared from
the screen.
If the message does not clear,
check that the shuttle assembly is
in the correct position. Repeat
Step 2 if necessary.
4
Close the folder cover.
Summary of Contents for PowerSquare 224
