3 - The User Interface - The BASIC Window
Watkiss PowerSquare™224 User Manual
21
- AUTO
Touch
AUTO
to select the default stitch pitch.
FORM
To make the square spine of the book, pressure is applied to
the spine. This process is called forming.
Touch
FORM
to specify the amount of spine form.
To make a good spine on different paper types, the amount of
spine form can be changed.
To change the amount of spine form
• Touch
NUMBER
to change how many times the spine is
processed
• Touch
PRESSURE
to change the pressure
- AUTO
Touch
AUTO
to select the optimum amount of spine form,
according to the set thickness.
- NUMBER
Touch
NUMBER
to select how many times the form roller proc-
esses the spine. The available options are 1, 2, 3 or 4.
An increase in
NUMBER
increases the time taken to form the
spine and can decrease the production rate for thin books.
Alternatively, increase the
PRESSURE
.
- PRESSURE
Touch
PRESSURE
to increase or decrease the pressure used
to form the spine.
Touch
+
to increase the amount of spine form. Touch
-
to
decrease the amount of spine form. The range is -9 to +9. The
default setting is 0.
- THRESHOLD
Use
THRESHOLD
to choose if a square spine is formed.
If the
SET THICKNESS
value is thinner than the
THRESHOLD
value, a square spine is not formed.
If the
SET THICKNESS
value is thicker than the
THRESHOLD
value, a square spine is formed.
If the
SET THICKNESS
value is 1.5mm or thicker, a square
spine is always formed.
The default value is 0.8mm. The allowed range is 0.1mm to
1.5mm
TRIM
The trim dimension is calculated automatically according to
the
PAPER SIZE
and
SET THICKNESS
.
If needed, the trim dimension can be changed. Touch
TRIM
to
adjust the size of the finished book after the fore-edge is
trimmed. The maximum trim is 28 mm.
The trim function can be turned off.
- AUTO
Touch
AUTO
to select the default trim position.
Button
Information
Summary of Contents for PowerSquare 224
