Watson Industries, Inc.
ADS-C232-3AD Rev A 10/25/2017
10
Specifications
Attitude
Range: Bank
±180° (±30° †)
Digital (Analog)
Range: Elevation
±90° (±30° †)
Digital (Analog)
Resolution:
0.02°
Binary mode (14 bit)
Analog Scale Factor:
6°/V †
±5V Output
Accuracy: Static
±0.5°
(up to 75°)
*
Accuracy: Dynamic
0.5%
Angular Rate
Range: Roll, Pitch
±100°/sec
Resolution:
0.025°/sec
Binary mode (14 bit)
Analog Scale Factor:
20°/sec/V
±5V Output
Scale Factor Accuracy:
0.5%
Bias: Roll, Pitch
< 0.3°/sec
±0.02°/sec Binary mode (14
bit)
Non-Linearity:
< 0.2%
Full scale range
Bandwidth:
50 Hz
Noise:
< 0.06°/sec rms
Acceleration
Range: X, Y, Z
±10g
Resolution:
4mg
Scale Factor Accuracy:
1%
Bias: X, Y, Z
< 10mg
Non-Linearity:
0.1%
Full scale range
Bandwidth:
3 Hz
Environmental
Temperature: Operating
-40°C to +85°C
Temperature: Storage
-55°C to +85°C
Vibration: Operating
5g rms
20 Hz to 2 KHz
Vibration: Survival
10g rms
20 Hz to 2 KHz
Shock: Survival
500g
1mS ½ sine wave
Electrical
Frame Rate:
250 Hz
Maximum
Startup Time: Data
5 sec
Startup Time: Fully operational
10 sec
Input Power:
8 to 45VDC
0.5W
Input Current:
40mA @ 12VDC
20mA @ 24VDC
Digital Output:
RS-232
Analog Output:
±5VDC
Analog Output Impedance:
300 Ohm
Per line
Physical
Axis Alignment:
< 0.25°
Size: Including Mounting Flanges
1.2"W x 2.8"L x 1.35"H
3.0 x 7.1 x 3.4 (cm)
Weight:
2.1 oz
60 grams
Connection:
Amp 4-794627-2 (12 pin)
*
Actual accuracy can be calculated as the listed percentage multiplied by the change in value over the entire dynamic maneuver.
†
The Analog output range for Bank & Elevation is menu selectable. This also changes the analog scale factor for Bank &
Elevation.
Specifications are subject to change without notice.
This product may be subject to export restrictions. Export Classification ECCN 7A994.
