Watson Industries, Inc.
SPS-P230 Rev A 10/17/2017
25
Typing in a ‘4’ will display the current Tilt Axis Stability Factor
Changing this parameter will change the Tilt Axis Stability or responsiveness. Please contact
Factory before changing this as it could make the Servo System unstable
Enter the Tilt Joystick Speed Factor with up to two decimal places.
Note: Input values outside the limit range are rejected (with ‘ENTRY EXCEEDS LIMITS - TRY AGAIN’
message) and the unit returns to the previous message
Set Joystick Pan Axis Parameters
Typing in '&' will bring up the following menu.
While in the Ampersand Menu, typing in '2' will bring up the following menu.
To Adjust the Pan Axis parameters, typing in ‘2’ will bring up the following menu.
Typing in a ‘1’ will reverse the Joystick Pan Axis polarity.
Typing in a ‘2’ will display the current Pan Joystick Feel Factor
Changing this parameter will change the Pan joystick’s responsiveness.
Enter the Pan Joystick Feel Factor with up to two decimal places.
Note: Input values outside the limit range are rejected (with ‘ENTRY EXCEEDS LIMITS - TRY AGAIN’
message) and the unit returns to the previous message.
THE CURRENT TILT AXIS STABILITY FACTOR = 0.50
ENTER TILT AXIS STABILITY FACTOR (0.05 to 1.00) FOLLOWED BY <CR>(OR 'Q' TO QUIT):
TYPE IN THE NUMBER OF YOUR SELECTION (OR 'Q' TO QUIT):
1 = ADJUST TIME CONSTANT
2 = SET JOYSTICK/AXIS PARAMETERS
3 = SET OUTPUT CHANNELS
4 = LIST CURRENT OUTPUT CHANNEL SELECTION
5 = SET NEW BAUD RATE
TYPE IN THE NUMBER OF YOUR SELECTION (OR 'Q' TO QUIT):
1 = ADJUST TILT AXIS PARAMETERS
2 = ADJUST PAN AXIS PARAMETERS
3 = SET NEW HOME POSITION
TYPE IN THE NUMBER OF YOUR SELECTION (OR 'Q' TO QUIT):
1 = REVERSE PAN JOYSTICK POLARITY
2 = ADJUST PAN JOYSTICK FEEL
3 = ADJUST PAN JOYSTICK SPEED
4 = ADJUST PAN AXIS STABILITY
THE CURRENT PAN JOYSTICK FEEL FACTOR = 0.50
ENTER PAN JOYSTICK FEEL FACTOR (0.05 to 1.00) FOLLOWED BY <CR>(OR 'Q' TO QUIT):
